Passenger Car Engine Oils

Quartz 9000 Future 5W-30

High Performance synthetic technology

Introduction


Synthentic technology multigrade oil for all recent gasoline and diesel engines. Suitable for turbo-compressed, multi-valved and direct injection diesel engines. Perfectly suits engines with catalytic converters and vehicles using unleaded fuel or liquefied petroleum gas. Meets the most difficult conditions of use (motorway, heavy urban traffic, etc.) during all seasons. Tested fuel savings (cycle ACEA M111 FE) greater than 2.5%.

Product Image



Quartz 9000 Energy OW-30

100% synthetic Lubricant

Introduction


100% synthetic, multigrade engine oil specially designed to meet the requirements of the most modem, high performance gasoline ant diesel cars and SUVs. Satisfies the most difficult driving conditions (city , road, motorway). Appropriate for sporting or intense drive. A very rich profile, exceeding the technical demands at the biggest carmakers.

Product Image



Quartz 9000 5W40

Synthetic Technology

Introduction


Synthetic technology multigrade oil far all recent gasoline and diese engines. Suitable for turbo-compressed, multi-valved and direct injection diesel engines. Suits engines with catalytic converters ant vehicles using unleaded fuel or liquefied petroleum gas. Meets the most difficult conditions of use (motorways, heavy urban traffic, etc. during all seasons.

Product Image



Quartz 7000 15W50 / 10W40

Semi Synthetic Engine Oil

Introduction


Synthetic based high performance multigrade engine oil designed for turbocharged and multi-valved engines. Ensures good engine cleanliness and protection of engine parts against wear and corrosion under as operating conditions (motorways, dense city traffic) during at seasons.

Product Image



Quartz 4×4 15W50

Synthetic Technology

Introduction


Synthetic based high performance multigrade petrol engine oil specially formulated to meet the toughest requirements of today’s high performance 4X4s and SUVs. Provides superior engine protection even at the most severe and rough operating conditions and is equally suited for high speed motorway driving.

Product Image



Quartz 4×4 15W40

Speciality 4×4 Engine Oil

Introduction


Mineral based high performance multigrade engine oil specially formulated to meet the toughest requirements of high performance 4X4s, SUVs and New Generation Pickups, Prolongs the life cycle of the engine in the most severe conditions : very dusty environment, desert, tracks, roads, urban driving etc.

Product Image



Quartz 5000 SL 10W30 / 15W40 / 20W50

Mineral Technology Multigrade Oil

Introduction


High performance multi-grade engine oil. Developed to meet the requirements of API Service Category SL. Particularly recommended for gasoline engines of passenger cars and delivery vans, in arduous service conditions inducted by the extremes of motorway ‘stop/start’ operations.

Product Image



Heavy Duty Diesel Engine

Rubia TIR 8600 FE 10W40

Very High Performance Diesel Engine Oil Synthetic Technology

Introduction


Synthetic technology lubricant for diesel engines with the Fuel Economy technology benefits. Can handle the most severe operating conditions. Particularly recommended by MAN for its Euro 3 engines and by IVECO for the longest oil change intervals (Euro 3 to Euro 5)

Product Image



Rubia TIR 7200 FE 15W30

High Performance Fuel Economy Diesel Engine Oil

Introduction


High quality lubricant for diesel engines with the Fuel Economy technology benefits. Can handle the most demanding operating conditions: deliveries, frequent stops, construction sites, harvesting etc. Suitable for all EURO 5 and previous engines except for EURO 4 and Euro 5 engines of MAN and DAF.

Product Image



Rubia TIR 8600 10W40

Synthetic Diesel Engin Oil

Introduction


New generation synthetic technology lubricant for all types of Diesel engines, turbo-charged or naturally aspirated, which are found in industrial vehicles. Recommended by all European engine manufacturers for the longest oil change intervals. Suitable for all EURO 5 and previous engines except for EURO 4 and Euro 5 engines of MAN and DAF.

Product Image



Rubia TIR 7400 15W40

High Performance Diesel Engine Oil

Introduction


Very high performance engine oil, developed to cope with the severe technical constraints of the new low emission Diesel engines. Recommended for all turbo charged and normally aspirated diesel engines for the toughest on and off road applications during all seasons. Suitable for all EURO 5 and previous engines except for EURO 4 and Euro 5 engines or MAN and DAF.

Product Image



Rubia TIR 6400 15W40

Super High Performance Diesel Engine Oil

Introduction


High quality multigrade engine oil for all turbocharged or normally aspirated diesel engines of trucks, buses, construction equipment or agricultural machinery, operating in the most severe conditions during all seasons.

Product Image



Rubia XT 15W40

Heavy Duty Diesel Engine Oil

Introduction


Multigrade engine oil for all turbocharged or normally aspirated diesel engines of industrial vehicles operating in the most severe conditions during all seasons.

Product Image



Rubia S 40 / 50

Monograde Diesel Engine Oil

Introduction


Monograde engine oil for all turbocharged or normally aspirated diesel engines of construction machineries, trucks, fishing boats or stationery engines. Also suitable for gear boxes, torque converters, hydraulic systems when the manufacturer requires an engine oil with an appropriate grade for these applications.

Product Image



Automatic & Manual Transmission Fluids

ATF III

Automatic Transmission Fluid

Introduction


Synthetic technology automatic transmission fluid specially designed for all automatic
transmissions and torque convertors of passenger cars, light commercial vehicles and industrial vehicles when the manufacturer requires a GM Dexron III-H fluid.

Product Image



Fluide II-D

Automatic Transmission Fluid

Introduction


Fluid for automatic or semi-automatic transmissions and torque converters of passenger cars, light commercial vehicles and industrial vehicles when the manufacturer requires a lubricant meeting GM Dexron II D specification.

Product Image



Transmission SYN FE 75W90

Transmission Fluid

Introduction


Very high performance multigrade synthetic oil for the lubrication of highly loaded gears. Designed to meet the challenge of the T.D.L. (Total Drive Line) concept for synchronised or non-synchronised manual gearboxes, axles, reduction gears etc. This lubricant has been certified by TUV in 2009: after tests carried out in Millbrook (UK) on a Euro 4 truck, the TUV confirms that the combined use of this product together with a Fuel Economy engine oil helps to save 3% of fuel on average.

Product Image



Transission TM 80W90 / 85W140

Transmission Fluid

Introduction


Extreme Pressure mineral oil for the lubrication of highly loaded gears (axles, final drives, transfer cases, gearboxes) when an API GL-5 level of performance is required. Specially recommended for highly loaded hypoid gear, with standard drain interval.

Product Image



EP 85W90 / 85W140

Transmission Fluid

Introduction


Gear Oil Recommended for manual transmissions. gearboxes, rear axles and all gears where API GL-4 level is required.

Product Image



Transtec 85W90 / 85W140

Transmission Fluid

Introduction


Gear Oil Recommended for manual transmissions. gearboxes, rear axles and all gears where API GL-4 level is required.

Product Image



Coolants & Brake Fluids / Greases

COOLELF AUTO SUPRA-37°

Introduction


Very long life’, ready-to-use coolant based on mono ethylene glycol and organic inhibitors of corrosion. Can be used in all cooling systems of combustion engines in cars, vans, trucks, buses, constructing machines and agriculture tractors.

Product Image



THERMOCOOL 50% and 33%

Introduction


Ready-to-use coolant based on mono ethylene glycol and selected inhibitors. Recommended for use in cooling circuits of petrol and diesel engines and ensures long lasting protection against freezing and corrosion.

Product Image



TOTAL HBF 4 / HBF 3

Introduction


Total HBF 4 is a fully synthetic brake fluid recommended for brake and clutch systems of all vehicles using synthetic fluids where a DOT 4 level brake fluid is required. HBF 4 is miscible with all other synthetic brake fluids of similar quality and is compatible with rubber seals and hoses.
Total HBF 3 is a fully synthetic brake fluid recommended for brake and clutch systems of all vehicles using synthetic fluids with DOT 3 level. HBF 3 is miscible with all Other synthetic brake fluids of similar quality and is compatible with rubber seals and hoses.

Product Image



MULTIS Complex EP2

Extreme Pressure, High Temperature Grease

Introduction


Extreme pressure, high temperature, lithium complex grease for all severe automotive and industrial applications subjected to heavy loads and high temperatures. Its range of applications is extensive, allowing stock rationalization and simplification of maintenance. Fulfils the requirements of most automotive Original Equipment Manufacturers. Operating temperature up to +160°C.

Product Image



Multis EP2 And Multis EP3

Extreme Pressure Grease

Introduction


Extreme pressure lithium based grease. Developed for lubrication of loaded slide-, ball-, and roller-bearings, wheel bearings, universal joints, chassis, and various shock loaded or vibrating applications in transport, agriculture and off road equipment. operating M We!. dusty and/or dry conditions

Product Image



Multis EP2 And Multis EP3

All Purpose Grease

Introduction


Multi purpose lithium based grease for general lubrication under normal operating conditions and loads. Suitable for lubrication of all kinds of universal applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.

Product Image



TP Star Range

TP Star Max HT 15 W-40

Introduction


Very high performance lubricant specially developed for the lubrication of machineries used in Public Works, Mines or Quarries, in hot-climate areas. TP STAR MAX HT 15W-40 together with TP STAR TRANS 85W-110 forms the “IF STAR Concept -Hot Countries”. Suitable for Diesel engines, hydraulic systems and manual or power shift gearboxes during all seasons in to (0° to +50°).

Product Image



TP Star Trans 85W-110

Introduction


Very high performance lubricant specially developed for the lubrication of machineries used in Public Works, Mines or Quarries, in hot climate areas. TP STAR TRANS 85W-110 together with TP STAR MAR FIT 15W-40 forms the “TP STAR Concept – Hot Countries”. Sortable for Axles / Final reduction Gearboxes, Limited slip differentials and Wet brakes during all seasons (0°C to +50°).

Product Image



btt